| Items |
 4WHV30M4-21 Myers® 4WHV and V4WHV Series 4" Non-Clog Wastewater Pumps |
4WHV30M4-03 Myers® 4WHV and V4WHV Series 4" Non-Clog Wastewater Pumps |
4WHV30M4-23 Myers® 4WHV and V4WHV Series 4" Non-Clog Wastewater Pumps |
4WHV30M4-43 Myers® 4WHV and V4WHV Series 4" Non-Clog Wastewater Pumps |
4WHV30M4-53 Myers® 4WHV and V4WHV Series 4" Non-Clog Wastewater Pumps |
|||||
| Head | 59 ft17.9 m | |||||||||
| Solids Handling (Diameter) | 3 in76 mm | |||||||||
| Liquids Handling | Effluent Raw Unscreened Sewage Storm Water | |||||||||
| Intermittent Liquid Temperature | up to 140 ºFup to 60 ºC | |||||||||
| Winding Insulation Temperature. (Class F) | 311 ºF155 ºC | |||||||||
| Motor Electrical Data1 | 1750 RPM 3-10 HP, 200/230/460/575V,3Ø, 60 Hz 3-5 HP, 230V, 1Ø, 60 Hz | |||||||||
| Acceptable pH Range | 6 to 9 | |||||||||
| Specific Gravity | 0.9 to 1.1 | |||||||||
| Viscosity | 28 to 35 SSU | |||||||||
| Discharge, Flanged Centerline. (Horizontal or Vertical) | 4 in101.6 mm | |||||||||
| Minimum Sump Diameter (Duplex) | 60 in105 m | |||||||||
| Motor Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Seal Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Volute Case Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Cord Cap Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Enclosed 2-Vane Impeller Material | Ductile Iron, Class 65, ASTM A536 | |||||||||
| Power Cord Material | 20 ft. SOOW | |||||||||
| Control Cord Material | 20 ft.SOOW | |||||||||
| Standard Double Tandem Mechanical Seal Material | Carbon & Ceramic, Type 21 | |||||||||
| Optional Double Tandem Mechanical Seal Material | Tungsten, Carbide | |||||||||
| Pump Shaft Material | 416 SST | |||||||||
| Motor Shaft Material | 416 SST | |||||||||
| Fasteners Material | 300 series SST | |||||||||
| Volute Wear Ring Material | Brass | |||||||||
| Power | 3 hp | |||||||||
| Voltage | 230 V | 200 V | 230 V | 460 V | 575 V | |||||
| Phase | 1 | 3 | 3 | 3 | 3 | |||||
| Frequency | 60 Hz | |||||||||
| Start | 101 A23.2 kV·A | 66.7 A23.0 kV·A | 58 A23.0 kV·A | 29 A23.0 kV·A | 21.3 A23.0 kV·A | |||||
| Run | 17.5 A2.1 kW4.0 kV·A | 15.0 A3.5 kW5.0 kV·A | 12.0 A3.5 kW5.0 kV·A | 6 A3.5 kW5.0 kV·A | 5 A3.5 kW5.0 kV·A | |||||
| NEC Code Letter | J | G | G | G | G | |||||
| Service Factor | 21 A2.5 kW1.2 | 18 A4.3 kW1.2 | 14.4 A4.3 kW1.2 | 7.2 A4.3 kW1.2 | 6 A4.3 kW1.2 | |||||
| Capacity | 720 gpm45.5 lps | |||||||||
| Agency Approvals |
 |
|||||||||
| Note | Consult factory for applications outside of those recommendations. | |||||||||
|
||||||||||
