Capacity : 50 gpm
Head : 480 ft
1/2, 3/4, 1 and 1 1/2 HP
8, 12, 20, 25, 30 and 35 GPM
4" Diameter Submersibles
Myers high head filtered effluent pumps are designed specifically for high pressure applications. The high performance, high head pumps are proven to be cost effective solutions for pumping filtered effluent from processed wastewater systems.
Advantages By Design
- High pressure capacity.
- Corrosion resistant design for long life.
- CSA-CUS listed.
(25 and 35 GPM CSA only.) - Dependable field proven motor.
- Stainless steel construction
- Built-in overload and electric surge protection
- Replaceable 10' jacketed power cord
- Hermetically sealed windings
- Continuous duty rating - Frequent cycling capabilities.
- 1/2 and 3/4 HP - 300 starts/24 hours
- 1 and 1 1/2 HP -100 starts/24 hours - Powerful, yet lightweight.
- Easy handling and installation.
Unit of Measure
Specifications
|
Corrosion Resistant Pump Construction
|
Corrosion Resistant Motor Construction
|
Agency Approvals
Specifications
Head |
N/A 480 ft |
Maximum Spherical Solids |
N/A 1/16" Diameter |
Liquids Handling |
N/A Filtered Effluent |
Maximum Liquid Temperature |
N/A 122 ºF |
Motor Electrical Data |
N/A
1/2 HP 115 volts, 1 ph 60 Hz, 3450 RPM 1/2 to 1-1/2 HP, 230 volts, 1 ph 60 Hz, 3450 RPM |
Motor Rating |
N/A Continuous Duty |
Maximum Motor Starts/24 Hours |
N/A 300 |
Specific Gravity |
N/A 0.9 to 1.1 |
Viscosity |
N/A 28 to 35 SSU |
Discharge Size NPT |
N/A 1 1/4 in |
Overall Pump Height (A) |
N/A 23 1/2 in |
Motor Height (B) |
N/A 9 1/2 in |
Intake Height (C) |
N/A 12 in |
Pump End Height (D) |
N/A 14 in |
Bypass Orifice Height (E) |
N/A 20 in |
Minimum Liquid Level (M) |
N/A 20 in |
Power |
N/A 1/2 hp |
Voltage |
N/A 115 V |
Maximum Current |
N/A 12.0 A |
Locked Rotor |
N/A 64 A |
Winding Resistance |
N/A 1.0 - 1.3 Ω |
Maximum Fuse/CB |
N/A 30 |
AWG Copper Wire Size1 | N/A 100 ft. @14AWG Copper Wire ft160 ft. @12AWG Copper Wire ft250 ft. @10AWG Copper Wire ft390 ft. @8AWG Copper Wire ft620 ft. @6AWG Copper Wire ft960 ft. @4AWG Copper Wire ft |
Capacity |
N/A 20 gpm |
Corrosion Resistant Pump Construction
Pump Shell Material |
N/A 300 series SST |
Shaft Material |
N/A 300 series SST |
Coupling material |
N/A 300 series SST |
Suction Bowl Material |
N/A Chemically Resistant Reinforced Nylon |
Discharge Bowl Material |
N/A Corrosion Resistant Reinforced Polycarbonate |
Staging Material |
N/A Premier PTFE Reinforced Polyester |
Built-in Check Valve |
N/A Premier PTFE Reinforced Polyester |
Thrust Washers Material |
N/A Phenolic |
Fasteners Material |
N/A 300 series SST |
Impeller Wear Ring Material |
N/A 300 series SST |
Corrosion Resistant Motor Construction
Motor Shell Material |
N/A SST |
End Caps Material |
N/A SST |
Spline Shaft Material |
N/A SST |
Electrical Protection |
N/A Built-in Overload and Surge Arrestor |
Replaceable Motor Lead Wire Assembly |
N/A
14-3 Jacketed Type SJOW-A UL and CSA Recognized |
Windings |
N/A Hermetically Sealed |
Motor Mounting |
N/A NEMA |
- 1 Maximum length of copper wire in feet. For aluminum wire, select one size larger (i.e. No. 8 aluminum for No. 10 copper)