| Items |
 6VH30M6-03 Standard 6" Non-Clog Wastewater Pumps |
6VH30M6-23 Standard 6" Non-Clog Wastewater Pumps |
6VH30M6-43 Standard 6" Non-Clog Wastewater Pumps |
6VH30M6-53 Standard 6" Non-Clog Wastewater Pumps |
6VH50M6-03 Standard 6" Non-Clog Wastewater Pumps |
|||||
| Head | 85 ft25.9 m | |||||||||
| Solids Handling | 3 in76 mm | |||||||||
| Liquids Handling | Effluent Raw Unscreened Sewage Storm Water | |||||||||
| Intermittent Liquid Temperature | up to 140 ºFup to 60 ºC | |||||||||
| Winding Insulation Temperature. (Class H) | 356 ºF180 ºC | |||||||||
| Motor Electrical Data |
1150 RPM: 3 and 5 HP, 200, 230, 460, 575V, 3Ø, 60 Hz 1750 RPM: 5-20 HP, 200, 230, 460, 575V, 3Ø, 60 Hz |
|||||||||
| Acceptable pH Range | 6 to 9 | |||||||||
| Specific Gravity | 0.9 to 1.1 | |||||||||
| Viscosity | 28 to 35 SSU | |||||||||
| Horizontal Discharge Flanged Centerline | 6 in 125 lb. ANSI 152.4 mm | |||||||||
| Motor Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Seal Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Volute Case Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Cord Cap Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Enclosed 2-Vane Impeller Material | Ductile Iron, Class 65, ASTM A536 | |||||||||
| Enclosed 1-Vane Impeller Material (optional) | Ductile Iron, Class 65, ASTM A536 | |||||||||
| Power Cord Material | 25 ft. SOOW | |||||||||
| Control Cord Material | 25 ft. SOOW | |||||||||
| Standard Double Tandem Mechanical Seal Material | Carbon & Ceramic, Type 21 | |||||||||
| Optional Double Tandem Mechanical Seal Material | Lower Tungsten, Carbide | |||||||||
| Pump Shaft Material | 416 SST | |||||||||
| Motor Shaft Material | 416 SST | |||||||||
| Fasteners Material | 300 series SST | |||||||||
| Volute Wear Ring Material | Brass | |||||||||
| Speed | 1150 rpm | |||||||||
| Power | 3 hp | 3 hp | 3 hp | 3 hp | 5 hp | |||||
| Voltage | 200 V | 230 V | 460 V | 575 V | 200 V | |||||
| Phase | 3 | |||||||||
| Frequency | 60 Hz | |||||||||
| Start | 77.0 A26.7 kV·A | 67.0 A26.7 kV·A | 33 A26.7 kV·A | 27 A26.7 kV·A | 115 A39.8 kV·A | |||||
| Run | 15.9 A3.3 kW5.5 kV·A | 13.8 A3.3 kW5.5 kV·A | 7 A3.3 kW5.5 kV·A | 5.5 A3.3 kW5.5 kV·A | 24 A5.4 kW8.3 kV·A | |||||
| NEC Code Letter | K | K | K | K | J | |||||
| Service Factor | 19 A4.3 kW1.2 | 16.6 A4.3 kW1.2 | 8.3 A4.3 kW1.2 | 6.6 A4.3 kW1.2 | 29.0 A6.9 kW1.2 | |||||
| Capacity | 900 gpm56.7 L/s | |||||||||
| Agency Approvals |
 |
|||||||||
| Note | Consult factory for applications outside of these recommendations. | |||||||||
|
|
||||||||||
