| Items |
 4VL500M4-43 Standard 4" High Head Non-Clog Wastewater Pumps |
4VL500M4-53 Standard 4" High Head Non-Clog Wastewater Pumps |
4VL600M4-43 Standard 4" High Head Non-Clog Wastewater Pumps |
4VL600M4-53 Standard 4" High Head Non-Clog Wastewater Pumps |
4VL750M4-43 Standard 4" High Head Non-Clog Wastewater Pumps |
|||||
| Head | 275 ft84 m | |||||||||
| Solids Handling | 3 in76 mm | |||||||||
| Liquids Handling | Drain Water Effluent Raw Unscreened Sewage | |||||||||
| Intermittent Liquid Temperature | up to 140 ºFup to 60 ºC | |||||||||
| Winding Insulation Temperature. (Class H) | 356 ºF180 ºC | |||||||||
| Motor Electrical Data |
1750RPM 50, 60, 75, 100, 125 HP 460 & 575 volts 3 phase, 60 Hz |
|||||||||
| Acceptable pH Range | 6 to 9 | |||||||||
| Specific Gravity | 0.9 to 1.1 | |||||||||
| Viscosity | 28 to 35 SSU | |||||||||
| Horizontal Discharge | 4 in101.6 mm | |||||||||
| Motor Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Seal Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Volute Case Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Cord Cap Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Impeller Material | Ductile Iron, Class 65, ASTM A536 | |||||||||
| Power Cord Material | 25 ft. SOOW | |||||||||
| Control Cord Material | 25 ft. SOOW | |||||||||
| Standard Double Tandem Mechanical Seal Material | Carbon & Ceramic | |||||||||
| Optional Double Tandem Mechanical Seal Material | Lower Tungsten, Carbide | |||||||||
| Pump Shaft Material | 416 SST | |||||||||
| Motor Shaft Material | 416 SST | |||||||||
| Fasteners Material | 300 series SST | |||||||||
| Case Wear Ring Materials | Bronze | |||||||||
| Speed | 1750 rpm | |||||||||
| Power | 50 hp | 50 hp | 60 hp | 60 hp | 75 hp | |||||
| Voltage | 460 V | 575 V | 460 V | 575 V | 460 V | |||||
| Phase | 3 | |||||||||
| Frequency | 60 Hz | |||||||||
| Start | 540 A390 kV·A | 432 A390 kV·A | 540 A390 kV·A | 432 A390 kV·A | 540 A430 kV·A | |||||
| Run | 65.0 A52.6 kW29.9 kV·A | 52 A52.6 kW29.9 kV·A | 75.0 A59.0 kW34.5 kV·A | 60 A59.0 kW34.5 kV·A | 101.8 A64.2 kW81.0 kV·A | |||||
| NEC Code Letter | H | H | F | F | G | |||||
| Service Factor | 75 A63.1 kW1.2 | 59.0 A63.1 kW1.2 | 90.0 A70.8 kW1.2 | 72 A70.8 kW1.2 | 122.2 A77.0 kW1.2 | |||||
| Capacity | 2,100 gpm8,000 lpm | |||||||||
| Agency Approvals |
 |
|||||||||
| Note | Consult factory for applications outside of those recommendations. | |||||||||
|
|
||||||||||
