| Items |
 4VE200M4-03 Standard 4" High Head Non-Clog Wastewater Pumps |
4VE200M4-23 Standard 4" High Head Non-Clog Wastewater Pumps |
4VE200M4-43 Standard 4" High Head Non-Clog Wastewater Pumps |
4VE200M4-53 Standard 4" High Head Non-Clog Wastewater Pumps |
4VE250M4-03 Standard 4" High Head Non-Clog Wastewater Pumps |
|||||
| Head | 165 ft50 m | |||||||||
| Solids Handling | 3 in76 mm | |||||||||
| Liquids Handling | Effluent Raw Unscreened Sewage Storm Water | |||||||||
| Intermittent Liquid Temperature | up to 140 ºFup to 60 ºC | |||||||||
| Winding Insulation Temperature. (Class H) | 356 ºF180 ºC | |||||||||
| Motor Electrical Data |
1750 RPM 20 - 30 HP 200/230/460/575 volts 3 phase, 60 Hz |
|||||||||
| Acceptable pH Range | 6 to 9 | |||||||||
| Specific Gravity | 0.9 to 1.1 | |||||||||
| Viscosity | 28 to 35 SSU | |||||||||
| Horizontal Discharge Flanged Centerline | 4 in 125 lb ANSI 101.6 mm | |||||||||
| Motor Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Seal Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Volute Case Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Cord Cap Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Impeller Material | Ductile Iron, Class 65, ASTM A536 | |||||||||
| Power Cord Material | 25 ft. SO 25 ft. SOOW | |||||||||
| Control Cord Material | 25 ft. SO 25 ft. SOOW | |||||||||
| Standard Double Tandem Mechanical Seal Material | Carbon & Ceramic, Type 21 | |||||||||
| Optional Double Tandem Mechanical Seal Material | Lower Tungsten, Carbide | |||||||||
| Pump Shaft Material | 416 SST | |||||||||
| Motor Shaft Material | 416 SST | |||||||||
| Fasteners Material | 300 series SST | |||||||||
| Volute Wear Ring Material | Brass | |||||||||
| Speed | 1750 rpm | |||||||||
| Power | 20 hp | 20 hp | 20 hp | 20 hp | 25 hp | |||||
| Voltage | 200 V | 230 V | 460 V | 575 V | 200 V | |||||
| Phase | 3 | |||||||||
| Frequency | 60 Hz | |||||||||
| Start | 334 A115.5 kV·A | 290 A115.5 kV·A | 145 A115.5 kV·A | 116 A115.5 kV·A | 575 A180.1 kV·A | |||||
| Run | 62.5 A21.2 kW23.9 kV·A | 60 A21.2 kW23.9 kV·A | 30 A21.2 kW23.9 kV·A | 24 A21.2 kW23.9 kV·A | 78.3 A26.9 kW30.3 kV·A | |||||
| NEC Code Letter | G | |||||||||
| Service Factor | 75 A26.1 kW1.2 | 72 A26.1 kW1.2 | 36 A26.1 kW1.2 | 28.8 A26.1 kW1.2 | 92.2 A33.3 kW1.2 | |||||
| Capacity | 700 gpm2,650 lpm | |||||||||
| Agency Approvals |
 |
|||||||||
| Note | Consult factory for applications outside of these recommendations. | |||||||||
|
|
||||||||||
