| Items |
 3WHV10M4-21 Myers® 3WHV and V3WHV Series 3" Non-Clog Wastewater Pumps |
3WHV10M4-03 Myers® 3WHV and V3WHV Series 3" Non-Clog Wastewater Pumps |
3WHV10M4-23 Myers® 3WHV and V3WHV Series 3" Non-Clog Wastewater Pumps |
3WHV10M4-43 Myers® 3WHV and V3WHV Series 3" Non-Clog Wastewater Pumps |
3WHV10M4-53 Myers® 3WHV and V3WHV Series 3" Non-Clog Wastewater Pumps |
|||||
| Head | 48 ft14.6 m | |||||||||
| Liquids Handling | Raw Unscreened Sewage|Effluent|Storm Water | |||||||||
| Intermittent Liquid Temperature | up to 140 ºFup to 60 ºC | |||||||||
| Winding Insulation Temperature. (Class B) | 266 ºF130 ºC | |||||||||
| Motor Electrical Data1 | 1-5 HE 230V 1Ø, 60 Hz 1-5 HP 200/230/460/575V 3Ø, 60 Hz 1750 RPM | |||||||||
| Acceptable pH Range | 6 to 9 | |||||||||
| Specific Gravity | 0.9 to 1.1 | |||||||||
| Viscosity | 28 to 35 SSU | |||||||||
| Discharge, Flanged Centerline. (Horizontal or Vertical) | 3 in76.2 mm | |||||||||
| Minimum Sump Diameter (Duplex) | 60 in1.5 m | |||||||||
| Motor Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Seal Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Volute Case Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Cord Cap Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Enclosed 2-Vane Impeller Material | Ductile Iron, Class 65 | |||||||||
| Power Cord Material | 20 ft. SOOW | |||||||||
| Control Cord Material | 20 ft. SOOW | |||||||||
| Standard Double Tandem Mechanical Seal Material | Carbon & Ceramic, Single, Type 21 | |||||||||
| Optional Double Tandem Mechanical Seal Material | Tungsten, Carbide | |||||||||
| Pump Shaft Material | 416 SST | |||||||||
| Motor Shaft Material | 416 SST | |||||||||
| Fasteners Material | 300 series SST | |||||||||
| Power | 1 hp | |||||||||
| Voltage | 230 V | 200 V | 230 V | 460 V | 575 V | |||||
| Phase | 1 | 3 | 3 | 3 | 3 | |||||
| Frequency | 60 Hz | |||||||||
| Start | 50.0 A11.5 kV·A | 36 A12.5 kV·A | 32 A12.7 kV·A | 19 A15.1 kV·A | 13 A12.7 kV·A | |||||
| Run | 8 A1.2 kW1.8 kV·A | 5.4 A1.3 kW1.8 kV·A | 4.5 A1.2 kW1.8 kV·A | 2.3 A1.2 kW1.8 kV·A | 1.8 A1.2 kW1.8 kV·A | |||||
| NEC Code Letter | J | K | K | M | J | |||||
| Service Factor | 10 A1.6 kW1.2 | 6.2 A1.5 kW1.2 | 5.4 A1.5 kW1.2 | 2.7 A1.5 kW1.2 | 2.2 A1.5 kW1.2 | |||||
| Capacity | 400 gpm25.24 lpm | |||||||||
| Agency Approvals |
 |
|||||||||
| Note | Consult factory for applications outside of these recommendations | |||||||||
|
||||||||||
