| Items |
 WG30H-21-25 Standard 3 HP High Head Submersible Grinder Pumps |
WG30H-03-25 Standard 3 HP High Head Submersible Grinder Pumps |
WG30H-23-25 Standard 3 HP High Head Submersible Grinder Pumps |
WG30H-43-25 Standard 3 HP High Head Submersible Grinder Pumps |
WG30H-53-25 Standard 3 HP High Head Submersible Grinder Pumps |
|||||
| Head | 170 ft52 m | |||||||||
| Liquids Handling | Domestic Raw Sewage | |||||||||
| Intermittent Liquid Temperature | up to 140 ºFup to 60 ºC | |||||||||
| Winding Insulation Temperature. (Class F) | 311 ºF155 ºC | |||||||||
| Motor Electrical Data1 | 3450 rpm, 60 Hz 3-5 hp, 230V 1Ø 3-7 1/2 hp, 200, 230, 460V 3Ø | |||||||||
| Acceptable pH Range | 6 to 9 | |||||||||
| Specific Gravity | 0.9 to 1.1 | |||||||||
| Viscosity | 28 to 35 SSU | |||||||||
| Discharge, NPT | 2 1/2 in63.5 mm | |||||||||
| Minimum Sump Diameter (Simplex) | 36 in91.4 cm | |||||||||
| Minimum Sump Diameter (Duplex) | 48 in121.9 cm | |||||||||
| Motor Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Seal Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Volute Case Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Cord Cap Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Recessed Impeller Material | Bronze | |||||||||
| Power Cord Material | 25 ft. SOOW | |||||||||
| Control Cord Material | 25 ft. SOOW | |||||||||
| Standard Double Tandem Mechanical Seal Material | Carbon & Ceramic | |||||||||
| Optional Double Tandem Mechanical Seal Material | Lower Tungsten Carbide | |||||||||
| Pump Shaft Material | 416 SST | |||||||||
| Motor Shaft Material | 416 SST | |||||||||
| Fasteners Material | 300 series SST | |||||||||
| Shredding Ring Material | 440 SST, 58-60 Rockwell | |||||||||
| Grinder Impeller Material | 440 SST, 58-60 Rockwell | |||||||||
| Power | 3 hp | |||||||||
| Voltage | 230 V | 200 V | 230 V | 460 V | 575 V | |||||
| Phase | 1 | 3 | 3 | 3 | 3 | |||||
| Frequency | 60 Hz | |||||||||
| Start | 82 A41.9 kV·A | 69 A23.9 kV·A | 53 A21.1 kV·A | 26 A20.7 kV·A | 21 A21.0 kV·A | |||||
| Run | 21.0 A4.3 kW4.8 kV·A | 15.0 A4.3 kW5.2 kV·A | 13.0 A4.3 kW5.2 kV·A | 6.5 A4.3 kW5.2 kV·A | 5.2 A4.3 kW5.2 kV·A | |||||
| NEC Code Letter | G | J | H | H | H | |||||
| Service Factor | 1.4 | |||||||||
| Capacity | 98 gpm367 lpm | |||||||||
| Agency Approvals |
 |
|||||||||
| Note | Consult factory for applications outside of these recommendations. | |||||||||
|
||||||||||
