Head |
N/A 480 ft |
Maximum Spherical Solids |
N/A 1/16" Diameter |
Liquids Handling |
N/A Filtered Effluent |
Maximum Liquid Temperature |
N/A 122 ºF |
Motor Electrical Data |
N/A
1/2 HP 115 volts, 1 ph 60 Hz, 3450 RPM 1/2 to 1-1/2 HP, 230 volts, 1 ph 60 Hz, 3450 RPM |
Motor Rating |
N/A Continuous Duty |
Maximum Motor Starts/24 Hours |
N/A 300 |
Specific Gravity |
N/A 0.9 to 1.1 |
Viscosity |
N/A 28 to 35 SSU |
Discharge Size NPT |
N/A 1 1/4 in |
Overall Pump Height (A) |
N/A 24 1/4 in |
Motor Height (B) |
N/A 9 1/2 in |
Intake Height (C) |
N/A 12 in |
Pump End Height (D) |
N/A 14 3/4 in |
Bypass Orifice Height (E) |
N/A 20 3/4 in |
Minimum Liquid Level (M) |
N/A 19 1/2 in |
Power |
N/A 1/2 hp |
Voltage |
N/A 230 V |
Maximum Current |
N/A 6.0 A |
Locked Rotor |
N/A 32 A |
Winding Resistance |
N/A 4.2 - 5.2 Ω |
Maximum Fuse/CB |
N/A 15 |
AWG Copper Wire Size1 | N/A 1020 ft. @10AWG Copper Wire ft1610 ft. @8AWG Copper Wire ft2510 ft. @6AWG Copper Wire ft3880 ft. @4AWG Copper Wire ft400 ft. @14AWG Copper Wire ft650 ft. @12AWG Copper Wire ft |
Capacity |
N/A 8 gpm |
Pump Shell Material |
N/A 300 series SST |
Shaft Material |
N/A 300 series SST |
Coupling material |
N/A 300 series SST |
Suction Bowl Material |
N/A Chemically Resistant Reinforced Nylon |
Discharge Bowl Material |
N/A Corrosion Resistant Reinforced Polycarbonate |
Staging Material |
N/A Premier PTFE Reinforced Polyester |
Built-in Check Valve |
N/A Premier PTFE Reinforced Polyester |
Thrust Washers Material |
N/A Phenolic |
Fasteners Material |
N/A 300 series SST |
Impeller Wear Ring Material |
N/A 300 series SST |
Motor Shell Material |
N/A SST |
End Caps Material |
N/A SST |
Spline Shaft Material |
N/A SST |
Electrical Protection |
N/A Built-in Overload and Surge Arrestor |
Replaceable Motor Lead Wire Assembly |
N/A
14-3 Jacketed Type SJOW-A UL and CSA Recognized |
Windings |
N/A Hermetically Sealed |
Motor Mounting |
N/A NEMA |